How are you supposed to watch the Deathly Hallows and the great battle of Hogwarts without hearing the fantastic notes of the London Symphony Orchestra and the majestic music of Alexandre Desplat? The scenes are just not complete without those powerful sounds.
If you’re going for the full experience, with sound, HD picture, and everything, but your projector and speakers don’t collaborate, your movie night may be ruined. There are several issues that may interfere with your equipment and stop you from watching your film on a big screen.
In this article, we’re going to talk about multiple audio issues. We’ll also help you figure out how to get sound from your projector to the speakers.
How to Get Sound From Projector to Speakers
Common issues that cause bad projector-speakers connection
As we mentioned, you may face several problems that stop your speakers from producing sound while connected to your projector. A huge variety of configurations, cables, audio sources, and other potential factors affect the speakers or the connection between them and the projector.
Usually, the most typical problems include bad or wrong cables that lead to a bad connection. Furthermore, the problem may be in the connection itself. Even if you put in the proper cables, you may wrongly arrange them and make an improper setup. Thus, you’ll get a loose connection.
Additionally, you may not receive sound from your speakers because of some settings on your projector and audio device settings. Also, the issue may be related to the software.
Different solutions for your audio problem
If you’re wondering how to get sound from projector to speakers, we have several solutions that may fix your problem. We recommend you check each step carefully. If one solution doesn’t fix the issue, you should proceed to the next one until you resolve it.
Check the connection
This is a classic restart solution. If your speakers don’t produce sound, you should first check the connections in your equipment. We recommend unplugging and plugging on every audio and video cable on your projector. After plugging in, make sure that the cables are not loosened because that will lead to no connection.
You should repeat the same procedure with the speakers’ cables. Again, if the cables are loosened, you won’t get any sound.
Cables
This is very important. Even if some port looks like a good fit for a particular cable type, it doesn’t mean that the cable you have is adequate. You should read the instructions or the labels on the projector. There you’ll probably find what type of cable is needed.
Please, keep in mind that the connection between the audio-video source and your projector can also impact the sound quality. Moreover, this connection can determine whether you’ll get a sound at all.
Therefore, you should check this relation and the cable you’re using. For instance, you can use a VGA cable between your laptop and the projector. However, these types of cables don’t support audio. They’re designed to support video only, meaning you’ll get the picture without a sound.
If you’re using a projector that requires VGA or RCA video cables, you’ll need another one to get a sound. Generally, you may use optical audio cables, 3.5 audio, or RCA audio.
Read More: How to Watch TV on a Projector Without a Cable Box
Damaged equipment
We maybe should have put this suggestion as last. However, it is still connected to the cables you’ll use to connect your projector to the video-audio source and to the speakers.
Those cables may be damaged. In that case, they may impact the sound quality, and thus, your speakers may produce noise. If you try to move the cables while they’re damaged, you may get a cut sound.
Therefore, to avoid this scenario, we suggest checking all cables used in the connection. If they’re damaged, it will be best to replace them rather than try to repair them.
Check the audio-video source
Sometimes we get stuck in fixing the outcome rather than the source. However, not getting a sound from your speakers connected to a projector may result from the incorrect audio output of the device that supplies the video and the audio.
If you’re trying to play a video on a projector from your computer or laptop, selecting the correct audio output is really important. This way, your projector won’t have trouble sending the audio to the speakers.
Additionally, you will not get a sound from your speakers if your laptop or computer is muted or the volume is very low. This may sound very simple, but we can’t put a number on the times we have made the same mistake. The same goes for the projector’s volume. All projectors have an option to lower the volume or to turn it off completely. Therefore, you should check your projector too.
Related: How to Connect a Phone With a Projector
Speakers
Lastly, you should check your speakers, of course. Whether you’re using a soundbar, stereo, Bluetooth speakers, or theater receiver, we recommend you check the speakers’ volume. Also, you should ensure that everything on them is turned on. You can test the speakers if you have another audio source to see if they’re working.
Some speakers, like soundbars and receivers, can switch several audio inputs. If you want to get a sound, check if the audio input corresponds with your projector.
Additionally, if you have wirelessly connected the speakers, you should check if something disrupts or interferes with the connection. You can try placing the projector and the speakers closer to avoid interruptions to the connection.
Conclusion
We hope that we have answered your question on how to get sound from projector to speakers. In our article, we were mainly focused on the common issues that can disturb the connection between your projector and the speakers. Usually, the problem is fixed by following the instructions we listed above.
Of course, these solutions are appropriate for problems that you can fix at home by yourself. If you’re still not getting a sound from your speakers, you can always ask for assistance from some tech-savvy guy, let them do the hard part, and enjoy your movie night at peace.